Hybrid Spiral Mesh Belt-Solve The Sticky Problem Of Quick Frozen Chicken

The common problem with quick freezing of chicken breast meat is that it freezes on the surface of the mesh belt and is not easy to cut.

It is necessary to use the close friction between the metal baffle at the feeding port and the mesh belt to shovel off the chicken breast in a manner similar to a "shovel".

The drawbacks of doing so can be clearly seen

1. The chicken breast is incomplete, as seen from the actual production process in the video, the proportion of damaged chicken breast meat reaches 10%.

For brand sellers, damaged chicken breasts are even eliminated as defective products.

For equipment manufacturers with high product standards, using traditional metal spiral mesh belts to transport chicken breast meat has great potential for improving production efficiency and completion rate of their products.

2. Due to the severe freezing of traditional metal Spiral Mesh Belt， they have been in a state of being shoveled during the production process, and the mesh wires will be pulled and worn to varying degrees. Over time, this has had a certain impact on the service life of the mesh belts

Hybrid Spiral Mesh Belt is a new product developed by our company that combines the advantages of metal horseshoes and plastic modules

Application of Hybrid Spiral Mesh Belt or Quick Frozen Chicken Breast Meat.

1. The contact area between the Hybrid Spiral Mesh Belt and the chicken breast is relatively large, making it difficult for the chicken breast to get stuck in the mesh gap during freezing. Therefore, severe freezing and sticking are not easy to occur.

2. It is easier to peel and feed between the chicken breast and the Hybrid Spiral Mesh Belt , and the wear on the surface of the mesh belt is greatly reduced by the discharge port, which in principle extends the service life of the mesh belt.

3. The installation method of plastic modules makes it more convenient for maintenance and replacement. Compared to the traditional method of removing and replacing metal spiral mesh belts, the direct replacement of plastic modules saves downtime and reduces maintenance costs for users.